Địa chỉ: 94 Phan Văn Trị, Phường 10, Quận Gò Vấp, Tp.HCM
Tel: 08 3588 0828 Fax: 08
3588 0829
Thông tin liên hệ: Mr Đô - 0909 560 828 - Email:quocdo@lamgiaphu.com
http://thegioithietbitudonghoa.mov.mn/
http://cokhicongnghiep.mov.mn/
GEMÜ
là một trong những nhà sản xuất hàng đầu của hệ thống van, đo lường và điều khiển,
và là người lãnh đạo thị trường thế giới của các van cho các ứng dụng vô trùng
trong các ngành công nghiệp dược phẩm và công nghệ sinh học. Vị trí này đã đạt
được sau đầu tư toàn diện GEMÜ trong nghiên cứu và phát triển ứng dụng cụ thể,
chiếm hơn 5% doanh thu của công ty.
Mức độ đổi mới gắn liền với vị trí - Đức được coi là
một quốc gia trên toàn cầu của các kỹ sư. GEMÜ trên bảng xếp hạng của 1.000 nhà
lãnh đạo thị trường toàn cầu Đức hàng đầu. GEMÜ trụ sở chính tại khu vực đó là
nơi có mật độ cao nhất của các nhà lãnh đạo thị trường toàn cầu, khu vực
Heilbronn-Franken tại Baden-Württemberg. Thành công quốc tế của GEMÜ chủ yếu dựa
vào các doanh nghiệp và tinh thần tiên phong của Fritz Müller, người đã phát
triển quá trình van nhựa đầu tiên của thế giới trong năm 1963 van điện từ điều
khiển trực tiếp Đây là điểm khởi đầu cho nền tảng của GEMÜ năm đó.
| Limit Switch Type 1252 |
| Output Signal:1 reed contact bistable, min.-contact |
| Part No: 1252000Z00000 |
| (EDV: 88029063) |
| Plastic Diaphragm Valve Type 600 |
| Connection:Union ends with DIN insert (for IR butt welding) |
| Body material:PP |
| Diaphragm material:EPDM |
| Control Function:Normally Closed |
| Working Pressure:Max. 10 bar |
| Working Temperature:5°C to 80°C |
| Part No: 600 25D7871141 2/N |
| (EDV: 88072224) |
| Valve Size: DN 25mm |
| GEMÜ 2/2 way plastic diaphragm valve Type 690 |
| Connection: Union ends with DIN insert (socket) |
| Body material:PVC |
| Seal material:EPDM |
| Control Function:Normally Closed |
| Working Pressure :0 - 10 bar |
| Equip with:GEMÜ Optical Position Indicator Type 1300 |
| Part No.: 690 40D7.1.14.1 2/N |
| Add on: 1300000Z13 |
| Type 9625 |
| Part No: 9625 10D 1 1/N |
| (EDV: 88027274) |
| 8506 6M11421 24V DC |
| (EDV: 88046910) |
| Description : GEMÜ Metal Solenoid Valve (NAMUR) |
| Connection : Threaded sockets G 1/4 |
| Body Material : Aluminium (AI) |
| Seal Material : Perbunan (NBR) |
| Voltage : 24V DC |
| Working Pressure : 2 - 8 bar |
| Working Temperature : -10°C to +50°C |
| Description : GEMÜ Electro-Pneumatic Positioner Type 1435 |
| (Without explosion proof rating) |
| Housing Material : Aluminium coated |
| Air Supply : Max. 6 bar |
Voltage
: 24V DC |
| Version : Electro-pneumatic 4-20mA, 90 l/min |
| Function : Single Acting |
| Part No: 1435000Z10002 |
| Description : GEMÜ plastic pilot valve, directly controlled type 334 |
| Connection : Threaded sockets DIN ISO 228, hollow bolt G 1/8 |
| Body Material : PBT, polybutylene terephthalate |
| Seal Material : FPM |
| Control Function : Normally Closed |
| Voltage : 24V DC |
| Electrical Connection : Plug type A with cable socket, without cable |
| Working Pressure : Max 10 bar |
| Part No: 334 1M182541C1010010 |
| (EDV: 88045712) |
| Description:GEMÜ plastic pilot valve, directly controlled type 334 |
| Connection:Threaded sockets DIN ISO 228, hollow bolt G 1/4 |
| Body Material:PBT, polybutylene terephthalate |
| Seal Material:FPM |
| Control Function:Normally Closed |
| Voltage:24V DC |
| Electrical Connection:Plug type A with cable socket, without cable |
| Working Pressure:Max 10 bar |
| Part No:334 1M142541C1010010 |
| (EDV: 88045711) |
| 855 25D33.3.14.1.44.900 |
| (EDV: 88282002) |
| 855 25D33.21.14.1.44.260 |
| (EDV: 88036736) |
| JWB-X0.75B-40D |
| JWB-X0.55B-13D |
| JWB-X0.75B-13D |
| Part No: 667 40D33.1.14 2 |
| Part No: 667 25D33.1.14 2 |
| Part No:600 10M52 (88026752) |
| 600 10M52 |
| (EDV: 8826752) |
| DN10-20mm |
| 600 10M13 |
| (EDV: 88037819) |
| DN10-20mm |
| 600 10M52 |
| (EDV: 88026752) |
| size: DN10-20 (MG10) |
| 600 25M5E |
| (EDV: 88076835) |
| DN 15-25 (MG25) |
| 514 25D 19511 2061 |
| DN25mm |
| 514 40D 19511 2061 |
| DN40mm |
| Max. 4.5 bar |
| 514 40D 19515 2061 |
| DN40mm |
| 4.0 - 8 bar |
| 514 20D 19511 2061 |
| DN20mm |
| 514 50D 19511 2061 |
| DN50mm |
| Part no: 1435000Z10002 |
| EDV No: 88096051 |
| SC0300U 6 F07F10NS22A 126Nm 206Nm 6bar SU30KD0 |
| 514 50D1.37.5-1-2 2061 |
| (EDV: 88011313) |
| DN 50mm |
| Equip with: 1300000Z06 |
| (EDV: 88004334) |
| 520 80D39.8.5.1.3/3 |
| (EDV: 88031662) |
| DN 80mm |
| Equip with:1300000Z17 |
| (EDV: 88004341) |
| 9520 80Z8.5.1.3/3 |
| (EDV: 88240731) |
| DN 80mm |
| Equip with:1300000Z17 |
| (EDV: 88004341) |
| 512 50D39.8.5.1.2 |
| (EDV: 88032056) |
| DN 50mm |
| Equip with:1300000Z06 |
| (EDV: 88004334) |
| 9512 50Z8.5.1.2 |
| (EDV: 88027458) |
| DN 50mm |
| Equip with: 1300000Z17 |
| (EDV: 88004341) |
| 334 1M182541C1010010 |
| (EDV: 88045712) |
| DN 1mm |
| 8258000P9101 |
| Spare coil for P/N : 8258 40D1.12.2.1 24V DC |
| 88214090 8258 40D 112 21 24 DC |
| 687 25D373413 3 1/N 1 |
| (EDV: 88290803) |
| DN 25mm |
| Equip with: |
| 1300000Z13 |
| (EDV: 88004337) |
| 600 25M13 |
| (EDV: 88037767) |
| DN 15-25mm |
| 8258 32D11221 230 50 |
| (EDV: 88204157) |
| DN 32mm |
| 514 32D13751 4 |
| (EDV# 88012582) |
| equipped 1300000Z38 |
| (EDV# 88261439) |
| DN 50mm |
| 0324 2M1474 41C10 |
| Voltage: 24V DC |
| (EDV# 88322110) |
| DN 2mm |
| 0324 2M1474 41L40 |
| Voltage: 230V AC (50/60Hz) |
| (EDV# 88318769) |
| DN 2mm |
| 514 50D13751 4 |
| (EDV: 88012583) |
| equipped 1300000Z38 |
| (EDV# 88261439) |
| DN 50mm |
| 835 25D72214 153 |
| (EDV: 88084330) |
| DN 25mm |
| 815 32D72214 162 |
| (EDV: 88084504) |
| DN 32mm |
| 4232000Z1407500M50000 |
| JWB-X0.75B-40D |
| JWB-X0.55B-13D |
| JWB-X0.75B-13D |
| 9615 10D 3 1/N |
| Edv No. 88027266 |
| DN 10 - 15mm |
| IG KU 5V TTL 4096 |
| D=12 5820 1,5M |
| Part no: 1435000Z10002 |
| EDV No: 88096051 |
| D-74653 52 4D 12014124 50/60 PS 3-0BAR 50/60HZ 24V 6WI-DE-8800027 5-00-3080547 |
| 600 25M52 |
| (EDV: 88015145) |
| DN15-25mm |
| 600 25M13 |
| (EDV: 88037767) |
| DN15-25mm |
| Part No: 1252000Z00000 |
| EDV No:88029063 |
| 807R25D72114 155 1600 |
| (EDV: 88044984) |
| DN 25mm |
| 1435000Z30201 |
| Part no. 1435000Z30201 |
| 1215000Z1546 |
| (EDV: 88046211) |
| 1435000Z10001 |
| (EDV: 88092764) |
| 610 12D1.1.52.1 1/N |
| Part No: 225 25D0.1.14.1 230 50/60 |
| Size: DN 25 |
| 61220D84C1520S1507 |
| Part No:600 10M52 (88026752) |
| Part No: 667 40D33.1.14 2 |
| DN 40mm |
| Add on: 130000023 |
| Part No: 667 25D33.1.14 2 |
| DN 25mm |
| Add on: 130000022 |
| Description:GEMÜ 2/2 way plastic diaphragm valve Type 667 |
| Connection:Union ends with inch insert (socket) |
| Body material:PVC |
| Seal material:EPDM |
| Control Function:Normally Open |
| Working Pressure:0 - 10 bar |
| Equip with:GEMÜ Optical Position Indicator Type 1300 |
| Size: DN 40mm |
| Part No: 667 50D33.1.14 2 |
| EDV: 88039635 |
| Add on：130000024 |
| EDV：88035004 |
| Description: GEMÜ 2/2 way plastic diaphragm valve Type 607 |
| Connection: Spigots DIN |
| Body material : PVC |
| Seal material: EPDM |
| Control Function: Manually Operated |
| Come with:Seal Adjuster , black handwheel |
| Part No：607 10E013A 0 S |
| EDV: 88044358 |
| Description:GEMÜ Flowmeter Type 855 |
| Float material:PP |
| Tube material:PSU, Polysulphone |
| O-ring material:EPDM |
| Union material:PVC |
| Connection:Union end with DIN insert/socket |
| Media:Water at 20deg C |
| Flowrange:40-400 l/hr |
| Valve Size: DN 20 mm |
| Part No: 855 20D7.22.14.1 33 400 |
| EDV: 88014591 |
| Part No: 667 25D33.1.14 2 |
| DN 25mm |
| Add on: 130000022 |
| Part No: 667 40D33.1.14 2 |
| DN 40mm |
| Add on: 130000023 |
| Part No:600 10M52 (88026752) |
| Part No:600 10M52 (88026752) |
| Plastic Diaphragm Valve Type 600 |
| Connection:Union ends with DIN insert (for IR butt welding) |
| Body material:PP |
| Diaphragm material:EPDM |
| Control Function:Normally Closed |
| Working Pressure:Max. 10 bar |
| Working Temperature:5°C to 80°C |
| Part No: 600 25D7871141 2/N |
| (EDV: 88072224) |
| Valve Size: DN 25mm |
| R690 50D 7 1 14 2 HDN |
| (EDV: 88365093) |
| DN 50mm |
| SC0300U 6 F07F10NS22A 126Nm 206Nm 6bar SU30KD0 |
| Solenoid Valve |
| Type 9625 |
| Part No: 9625 10D 1 1/N |
| (EDV: 88027274) |
| Type: 52 4D1151 24DC U (EDV:88000238) |
| VEGA Germany |
| WZ 2.2 Measurement of surface finishing |
| WZ 2.2 Pressure Test |
| WZ 2.2 Pressure Test |
| WZ 3.1B Body Material Analysis Inspection Certificate |
| WZ 3.1B Material Analysis Inspection Certificate |
| 807R50D72114 173 10000 |
| (EDV: 88002862) |
| DN 50mm |
| 554 15D31 37 30 1 B |
| (EDV: 88372189) |
| DN 15mm |
| WZ 3.1B Body Material Analysis Inspection Certificate |
| WZ 2.2 Pressure Test |
| 554 15D6037510 |
| (EDV: 88208952) |
| 1300000Z04 |
| (EDV: 88004333) |
| DN 15mm |
| 9615 10D 3 1/N |
| Edv No. 88027266 |
| DN 10 - 15mm |
| 600 25M52 |
| (EDV: 88015145) |
| DN15-25mm |
| 600 25M13 |
| (EDV: 88037767) |
| DN15-25mm |
| Part No: 1252000Z00000 |
| EDV No:88029063 |
| 807R25D72114 155 1600 |
| (EDV: 88044984) |
| DN 25mm |
| 600 25M52 |
| (EDV: 88015145) |
| DN 25mm |
| 600 10M52 |
| (EDV: 88026752) |
| size: DN10-20 (MG10) |
| 600 25M5E |
| (EDV: 88076835) |
| DN 15-25 (MG25) |
| 514 25D 19511 2061 |
| DN25mm |
| 514 40D 19511 2061 |
| DN40mm |
| Max. 4.5 bar |
| 514 40D 19515 2061 |
| DN40mm |
| 4.0 - 8 bar |
| 514 20D 19511 2061 |
| DN20mm |
| 514 50D 19511 2061 |
| DN50mm |
| 514 50D 1 37 5 1 5 |
| (EDV: 88039357) |
| equipped |
| 1300000Z06 |
| (EDV: 88004334) |
| DN 50mm |
| 0324 2M1474 41C1010210 |
| Voltage: 24V DC |
| (EDV# 88322110) |
| DN 2mm |
| 0324 2M1474 41L4010210 |
| Voltage: 230V AC (50/60Hz) |
| (EDV# 88318769) |
| DN 2mm |
| 600 25D7871141 2/N |
| (EDV: 88072224) |
| DN 25mm |
| 618 15D1.12.4.C4.AP.6442 AO |
| (EDV 88041354) |
| DN 15mm |
| 600 10M52 |
| (EDV: 8826752) |
| DN10-20mm |
| 600 10M13 |
| (EDV: 88037819) |
| DN10-20mm |
| 514 40D 19515 2061 |
| DN40mm |
| Max. 9 bar |
| 4.0 - 8 bar |
| 688 25D87405E11V1 1502 |
| DN 25mm |
| 1435000Z10001 |
| 1435000Z10002 |
| 1252000Z00000 |
| (EDV: 88029063) |
| 1251000Z00000 |
| (EDV: 88029062) |
| Part no: 1435000Z10002 |
| EDV No: 88096051 |
| Type: 52 4D1151 24DC U (EDV:88000238) |
| 554 15D31C151 0 (EDV: 88320057) |
| Equip with 1300000Z04 (EDV: 88004333) |
| 673 32D1834170S1500 |
| 687 25D17341311/N-1502 (88048159) |
| 687 25D373413 3 1/N 1 |
| (EDV: 88290803) |
| DN 25mm |
| Equip with: |
| 1300000Z13 |
| (EDV: 88004337) |
| 688 25D87405E11V1 1502 |
| DN 25mm |
| 807R50D72114 173 10000 |
| (EDV: 88002862) |
| DN 50mm |
| 815 32D72214 162 |
| (EDV: 88084504) |
| DN 32mm |
| 817 20D33 21 14 146 250 |
| 817 20D33 21 14 148 640 |
| 8253 25D 31 37 2 1 24DC |
| DN 25mm |
| 8258 32D11221 230 50 |
| (EDV: 88204157) |
| DN 32mm |
| 8258000P9101 |
| Spare coil for P/N : 8258 40D1.12.2.1 24V DC |
| 8258-32-D-31-37-2-1-24-DC |
| 835 25D72214 153 |
| (EDV: 88084330) |
| DN 25mm |
| 8506 6M11421 24V DC |
| (EDV: 88046910) |
| Description : GEMÜ Metal Solenoid Valve (NAMUR) |
| Connection : Threaded sockets G 1/4 |
| Body Material : Aluminium (AI) |
| Seal Material : Perbunan (NBR) |
| Voltage : 24V DC |
| Working Pressure : 2 - 8 bar |
| Working Temperature : -10°C to +50°C |
| 855 15 D 7 21 14 1 21 60 |
| 855 25D33.21.14.1.44.260 |
| (EDV: 88036736) |
| 855 25D33.3.14.1.44.900 |
| (EDV: 88282002) |
| 88214090 8258 40D 112 21 24 DC |
| 9512 50Z8.5.1.2 |
| (EDV: 88027458) |
| DN 50mm |
| Equip with: 1300000Z17 |
| (EDV: 88004341) |
| 9520 80Z8.5.1.3/3 |
| (EDV: 88240731) |
| DN 80mm |
| Equip with:1300000Z17 |
| (EDV: 88004341) |
| Description : GEMÜ Electro-Pneumatic Positioner 1435 (without Mounting Kit) |
| Description : GEMÜ Electro-Pneumatic Positioner Type 1435 |
| (Without explosion proof rating) |
| Housing Material : Aluminium coated |
| Air Supply : Max. 6 bar |
| Voltage : 24V DC |
| Version : Electro-pneumatic 4-20mA, 90 l/min |
| Function : Single Acting |
| Part No: 1435000Z10002 |
| Description : GEMÜ plastic pilot valve, directly controlled type 334 |
| Connection : Threaded sockets DIN ISO 228, hollow bolt G 1/8 |
| Body Material : PBT, polybutylene terephthalate |
| Seal Material : FPM |
| Control Function : Normally Closed |
| Voltage : 24V DC |
| Electrical Connection : Plug type A with cable socket, without cable |
| Working Pressure : Max 10 bar |
| Part No: 334 1M182541C1010010 |
| (EDV: 88045712) |
| Description: GEMÜ 2/2 way plastic diaphragm valve Type 607 |
| Connection: Spigots DIN |
| Body material : PVC |
| Seal material: EPDM |
| Control Function: Manually Operated |
| Come with:Seal Adjuster , black handwheel |
| Part No：607 10E013A 0 S |
| EDV: 88044358 |
| Description:GEMÜ 2/2 way plastic diaphragm valve Type 667 |
| Connection:Union ends with inch insert (socket) |
| Body material:PVC |
| Seal material:EPDM |
| Control Function:Normally Open |
| Working Pressure:0 - 10 bar |
| Equip with:GEMÜ Optical Position Indicator Type 1300 |
| Size: DN 40mm |
| Part No: 667 50D33.1.14 2 |
| EDV: 88039635 |
| Add on：130000024 |
| EDV：88035004 |
| Description:GEMÜ Flowmeter Type 855 |
| Float material:PP |
| Tube material:PSU, Polysulphone |
| O-ring material:EPDM |
| Union material:PVC |
| Connection:Union end with DIN insert/socket |
| Media:Water at 20deg C |
| Flowrange:40-400 l/hr |
| Valve Size: DN 20 mm |
| Part No: 855 20D7.22.14.1 33 400 |
| EDV: 88014591 |
| Description:GEMÜ plastic pilot valve, directly controlled type 334 |
| Connection:Threaded sockets DIN ISO 228, hollow bolt G 1/4 |
| Body Material:PBT, polybutylene terephthalate |
| Seal Material:FPM |
| Control Function:Normally Closed |
| Voltage:24V DC |
| Electrical Connection:Plug type A with cable socket, without cable |
| Working Pressure:Max 10 bar |
| Part No:334 1M142541C1010010 |
| (EDV: 88045711) |
| Diaphragm Valve: |
| DN 10-20mm |
| DN 25mm |
| DN 50mm |
| DN 50mm |
| 667 50D71145 |
| (EDV: 88050362) |
| DN 65 mm 514 65D1.37.5-1-2 2061 (88047034) |
| GEMÜ |
| GEMÜ 2/2 way plastic diaphragm valve Type 690 |
| Connection: Union ends with DIN insert (socket) |
| Body material:PVC |
| Seal material:EPDM |
| Control Function:Normally Closed |
| Working Pressure :0 - 10 bar |
| Equip with:GEMÜ Optical Position Indicator Type 1300 |
| Part No.: 690 40D7.1.14.1 2/N |
| Add on: 1300000Z13 |
| GEMÜ Electro-Pneumatic Positioner Type 1435 |
| GEMÜ Electro-Pneumatic Positioner Type 1435 |
| GEMÜ Metal Diaphragm Valve, Pneumatically Operated Type 615 |
| GEMÜ Metal Solenoid Valve (NAMUR) |
| GEMÜ Plastic Pilot Valve, Directly Controlled Type 0322 |
| GEMÜ Spare Actuator Type 9625 |
| GEMÜ Spare Working Diaphragm |
| JWB-X0.75B-13D |
| JWB-X0.75B-40D |
| Limit Switch Type 1252 |
| Output Signal:1 reed contact bistable, min.-contact |
| Part No: 1252000Z00000 |
| (EDV: 88029063) |
| Part no: 1435000Z10002 |
| EDV No: 88096051 |
| Part no: 1435000Z10002 |
| EDV No: 88096051 |
| Part no: 1435000Z10002 |
| EDV No: 88096051 |
| GEMÜ Metal Globle Valve Type 514 & Electro Positioner Type 1435 |
| JWB-X0.55B-13D |
| (61220D59.34.17.0.S.1500) |
| * SOLENOID : |
| 0324 2M1474 41C10 |
| Voltage: 24V DC |
| (EDV# 88322110) |
| DN 2mm |
| 0324 2M1474 41C1010210 |
| Voltage: 24V DC |
| (EDV# 88322110) |
| DN 2mm |
| 0324 2M1474 41L40 |
| Voltage: 230V AC (50/60Hz) |
| (EDV# 88318769) |
| DN 2mm |
| 0324 2M1474 41L4010210 |
| Voltage: 230V AC (50/60Hz) |
| (EDV# 88318769) |
| DN 2mm |
| 1230000ZA021031101101 |
| 1435000Z10002 (1435000Z10002-0 not correct) |
| 3020 25D7 1 4 P 523 3600 |
| 334 1M182541C1010010 |
| (EDV: 88045712) |
| DN 1mm |
| 417 50D7.1.14.0 |
| 512 50D39.8.5.1.2 |
| (EDV: 88032056) |
| DN 50mm |
| Equip with:1300000Z06 |
| (EDV: 88004334) |
| 514 20D 19511 2061 |
| DN20mm |
| 514 20D 19511 2061 |
| DN20mm |
| 514 25D 19511 2061 |
| DN25mm |
| 514 25D 19511 2061 |
| DN25mm |
| 514 32D13751 4 |
| (EDV# 88012582) |
| equipped 1300000Z38 |
| (EDV# 88261439) |
| DN 50mm |
| 514 40D 19511 2061 |
| DN40mm |
| Max. 4.5 bar |
| 514 40D 19511 2061 |
| DN40mm |
| Max. 4.5 bar |
| 514 40D 19515 2061 |
| DN40mm |
| 4.0 - 8 bar |
| 514 40D 19515 2061 |
| DN40mm |
| 4.0 - 8 bar |
| 514 40D 19515 2061 |
| DN40mm |
| Max. 9 bar |
| 4.0 - 8 bar |
| 514 50D 1 37 5 1 5 |
| (EDV: 88039357) |
| equipped |
| 1300000Z06 |
| (EDV: 88004334) |
| DN 50mm |
| 514 50D 19511 2061 |
| DN50mm |
| 514 50D 19511 2061 |
| DN50mm |
| 514 50D1.37.5-1-2 2061 (88011313) |
| 514 50D1.37.5-1-2 2061 |
| (EDV: 88011313) |
| DN 50mm |
| Equip with: 1300000Z06 |
| (EDV: 88004334) |
| 514 50D13751 4 |
| (EDV: 88012583) |
| equipped 1300000Z38 |
| (EDV# 88261439) |
| DN 50mm |
| 514 65D1.37.5-1-2 2061 (88047034) |
| 520 80D39.8.5.1.3/3 |
| (EDV: 88031662) |
| DN 80mm |
| Equip with:1300000Z17 |
| (EDV: 88004341) |
| 554 15D31 37 30 1 B |
| (EDV: 88372189) |
| DN 15mm |
| 554 15D31C151 0 (EDV: 88320057) |
| Equip with 1300000Z04 (EDV: 88004333) |
| 554 15D6037510 |
| (EDV: 88208952) |
| 1300000Z04 |
| (EDV: 88004333) |
| DN 15mm |
| 600 10M13 |
| (EDV: 88037819) |
| DN10-20mm |
| 600 10M52 (88026752) _ 60010M52 |
| 600 10M52 |
| (EDV: 88026752) |
| size: DN10-20 (MG10) |
| 600 10M52 |
| (EDV: 88026752) |
| size: DN10-20 (MG10) |
| 600 10M52 |
| (EDV: 8826752) |
| DN10-20mm |
| 600 25D7871141 2/N |
| (EDV: 88072224) |
| DN 25mm |
| 600 25M13 |
| (EDV: 88037767) |
| DN 15-25mm |
| 600 25M5E |
| (EDV: 88076835) |
| DN 15-25 (MG25) |
| 600 25M5E |
| (EDV: 88076835) |
| DN 15-25 (MG25) |
| 600 32D78 71 14 1 3/N |
| 61220D84C1520S1507 |
| 618 15D1.12.4.C4.AP.6442 AO |
| (EDV 88041354) |
| DN 15mm |
| 640 25D 1 37 12 1 1 (EDV 88052017) |
| 667 25D33.1.14.2 |
| 667 40D33.1.14.2 |
| 673 25D1834170S1500 |
| Description:GEMÜ Electrical Position indicator ATEX for 610 12D |
| Feedback:Single pole double throw contact, microswitches |
| For Type:815,817,830,832,835,865,880,885 |
| For Type:815,817,830,832,835,865,880,885 |
| Flow Rate ~ 50 l/min |
| Description:GEMÜ Electro-Pneumatic Positioner Type 1435 |
| (Without explosion proof rating) |
| Housing Material:Aluminium coated |
| Air Supply:Max. 6 bar |
| Voltage:24V DC |
| Version:Electro-pneumatic 4-20mA, 50 l/min |
| Function:Single Acting |
| Flow Rate ~ 90 l/min |
| GEMÜ Spare Working Diaphragm |
| Diaphragm Material : EPDM |
| Spare Working Diaphragm |
| Description : GEMÜ Spare Working Diaphragm |
| Diaphragm Material : PTFE/EPDM |
| Description:GEMÜ Plastic Diaphragm Valve, Pneumatically Operated |
| Connection:Threaded Sockets DIN ISO 228 |
| Body material:PVC |
| Diaphragm material:PTFE/EPDM |
| Control Function:Normally Closed |
| Working Pressure:Max. 6 bar |
| Plastic Flowmeter |
| GEMÜ Spare Actuator |
| Encoder |
| Limit Switch |
| GEMÜ 2/2 way plastic solenoid valve Type 225 |
| GEMÜ 2/2 way plastic solenoid valve Type 225 |
| Description:GEMÜ 2/2 way plastic solenoid valve Type 225 |
| Connection:Spigots DIN |
| Body material:PVC |
| Seal material:EPDM |
| Control Function:Normally Closed |
| Supply Voltage:230 V |
| Working Pressure:0 - 6 bar |
| S/N 1) EDV No: Description: 88039444 WZ 3.1B Material Analysis Inspection Certificate Net Unit PriceEURO 70.00 per order item |
| 2) 88094384 WZ 3.1B Measurement of surface finishing Allocation of the surface finish certificate to the valve bodies by clear numbering of bodies EURO 35.00 per valve |
| 3) 88039443 WZ 2.2 Pressure Test General confirmation of pressure test with max. 6 bar air. Only possible with assembled valve EURO 15.00 per order item |
| 4) 88079146 WZ 2.2 Measurement of surface finishing General confirmation that surface finish specifications have been adhered to and indication of tst conditions EURO 20.00 per order item |
| 5) Documentation available upon request: Letter of Conformity F.O.C |
| GEMÜ Electro-Pneumatic Positioner Type 1435 |
| PartNo. 1435 000Z10001 |
| EDV No. 88092764 |
| Description : GEMÜ Electro Pneumatic Positioner Type 1435 |
| Air Supply : Max. 6 bar |
| Output Signal: 0-10V, optional 4-20mAA |
| Input Signal : 0/4-20mA, 0-10V |
| Voltage Supply : 24V DC |
| Action : Single acting |
| DN 10-20mm |
| 600 10M52 |
| Description : GEMÜ Spare Working Diaphragm |
| Diaphragm M : EPDM/PTFE |
| XCKJ10511 |
| DPS_20R Push-Pull force gauge |
| The model 9800 is discontinued and is replaced by RX-20, see attached |
| 1. BHI62ET-7.5 Induction Motor |
| 2. BHI62E-7.5 Induction Motor |
| 8.5868.1231.3112 |
| D8.4C1.0600.6324.G321 |
| 673 25D1834170S1500 |
| DN 25mm |
| Description : GEMÜ Metal Diaphragm Valve, Manually Operated |
| Conneciton : Spigots DIN 11850, series 3 |
| Body Material : 1.4435 (316L) Stainless Steel |
| Diaphragm Material : EPDM |
| Control Function : Manually Operated |
| Surface Finishing : Ra <= 6.3 μm blasted internal/external |
| Working Pressure : Max 10 bar |
| Temperature : Max 150°C |
| 673 32D1834170S1500 |
| DN 32mm |
| Description : GEMÜ Metal Diaphragm Valve, Manually Operated |
| Conneciton : Spigots DIN 11850, series 3 |
| Body Material : 1.4435 (316L) Stainless Steel |
| Diaphragm Material : EPDM |
| Control Function : Manually Operated |
| Surface Finishing : Ra <= 6.3 μm blasted internal/external |
| Working Pressure : Max 10 bar |
| Temperature : Max 150°C |
| 540 15D 1 37 5 1 1 (88051957) _ DN 15 mm |
| (540-15D-1-37-5-1-1 / 54015D137511) |
| Description : GEMÜ 2/2 Way Metal Globe Valve Type 540 |
| Connection : Threaded sockets DIN ISO 228 |
| Body material : 1.4408 Stainless Steel |
| Diaphragm material : PTFE |
| Control Function : Normally Closed |
| Working Pressure : Max 25 bar |
| Woking Temperatur : Max 180°C |
| 554 40D 60 37 5 1 1 (88211296) _ DN 40 mm |
| (554-40D-60-37-5-1-1 / 55440D6037511) |
| Description : GEMÜ 2/2 Way Metal Globe Valve Type 554 |
| Connection : Spigots EN ISO 1127 |
| Body material : 1.4408 Stainless Steel |
| Diaphragm material : PTFE |
| Control Function : Normally Closed |
| Working Pressure : Max 4.5 bar |
| Woking Temperatur : Max 180°C |
| GEMÜ Spare Actuator Type 9625 |
| (actuator come with optical position indicator) |
| DN 10-20 |
| 9625 10D 1 1/N |
| (EDV: 88027274) |
| GEMÜ Metal Solenoid Valve (NAMUR) |
| Connection : Threaded sockets G 1/4 |
| Body Material : Aluminium (AI) |
| Seal Material : Perbunan (NBR) |
| Voltage : 24V DC |
| Working Pressure : 2 - 8 bar |
| Working Temperatur : -10°C to +50°C |
| Valve Size: DN 6mm |
| Type: 8506 |
| Part No. 8506 6M11421 24V DC (8506-6-M-1-14-2-1-24) |
| EDV: 88046910 |
| 855 15 D 7 21 14 1 21 60 |
| Media: H2O/Water at 20 Deg.C |
| Range: 5 - 60 L/hr |
| (EDV: 88010205) |
| 855 15 D 7 21 14 1 25 320 |
| Media: H2O/Water at 20 Deg.C |
| Range: 30 - 320 L/hr |
| (EDV: 88010209) |
| 855 25 D 7 21 14 1 44 1000 |
| Media: H2O/Water at 20 Deg.C |
| Range: 100 - 1000 L/hr |
| (EDV: 88003059) |
| 805 32 D 7 21 14 1 63 2500 |
| 805 32D 7 21 14 1 63 2500 (EDV.8804 378.00 378.00 |
| Media: H2O/Water at 20 Deg.C |
| Range: 200 - 2500 L/hr |
| (EDV: 88044971) |
| 3020 25D7 1 4 P 523 3600 |
| (EDV. 88268887) |
| Description : GEMÜ Flow Transmitters , Turbine Type 3020 |
| Connection : Union end with DIN solent cement dockets |
| Material : Housing PVC-U grey, inner parts PVDF |
| DN 25mm |
| Seal Material : FPM |
| Voltage : 24V DC |
| Transcuder : Analogue output4-20mA |
| Flow Rate : max. flow 3600/l/h |
| 687 25D17341311/N-1502 (88048159) |
| Description : GEMÜ 2/2 Way Metal Diaphragm Valve,Pneumatically Operated 687 |
| Connection : Spigots DIN 11850, Series 2 |
| Body material : 1.4435 Investment casting (316L) |
| Diaphragm material : EPDM - Max 150°C |
| Control Function : Normally Closed |
| Surface Finishing : 0.8 μm mechanically polished internal, blasted external |
| Working Pressure : Max. 10 bar |
| Working Temperature : Max. 150°C |
| 687 25D17341311/N-1502 (88048159) |
| Description : GEMÜ 2/2 Way Metal Diaphragm Valve, Pneumatically Operated 625 |
| Connection : Spigots DIN 11850, Series 2 |
| Body material : 1.4435 Investment casting (316L) |
| Diaphragm material : EPDM - Max 150°C |
| Control Function : Normally Closed |
| Surface Finishing : 6.3 μm blasted internal/external |
| Working Pressure : Max. 6 bar |
| Working Temperature : Max. 150°C |
| GEMÜ Spare Working Diaphragm |
| 600 25M13 (88037767) |
| ** (For Valve Size DN15 to DN25) |
| GEMÜ Spare Working Diaphragm |
| 600 10M13 (88037819) |
| ** (For Valve Size DN10 to DN2) |
| GEMÜ |
| GEMÜ Spare Working Diaphragm |
| EPDM/PTFE |
| Part No. 600-010-M52 |
| GEMÜ Metal Globle Valve Type 514 & Electro Positioner Type 1435 |
| Description : GEMÜ 2/2 Way Metal Globle Valve Type 514 |
| Connection : Threaded sockets DIN ISO 228 |
| Body material : 1.4408, cast stainless steel |
| Diaphragm materia: PTFE |
| Control Function : Normally Closed |
| Control Pressure : 5.5 - 10 |
| Working Pressure : Max. 10 bar |
| Perm.Temp : 180 Deg.C |
| Description : GEMÜ Electro Pneumatic Positioner Type 1435 |
| Air Supply : Max. 6 bar |
| Output Signal: 0-10V, optional 4-20mAA |
| Input Signal : 0/4-20mA, 0-10V |
| Voltage Supply : 24V DC |
| Action : Single acting |
| Explosion : Without explosion proof rating |
| Version : Electro-pneumatic 4-20mA, 50 I/min |
| Accessories : - Mounting Set with Travel Sensor Type1445 & Air-Tubing Type 1440 |
| - Air Filter Regulator B72G & Pressure Gauge 18-013-989 |
| DN 50 mm 1 set 514 50D1 37 5 1 5 2061(EDV.88250361) |
| 1/ add on 1435000Z10001 (EDV, 88092764) |
| 2/ add on 1445000Z10551705002 (EDV.88279098) Type: 1435 |
| 3/ add on 1440000ZKS (EDV, 88255000) |
| 4/ add on B72G-2BK-AL1-RMN |
| 5/ add on 18-013-989 |
| 667 40D33.1.14.2 |
| (EDV,88065232)_ DN 40mm |
| Description : GEMÜ Plastic Diaphragm Valve, Pneumatically Operated Type 667 |
| Conneciton : Union ends with inch insert (socket) |
| Body Material : PVC-U, grey |
| Diaphragm Material : EPDM |
| Control Function : Normally Open |
| Working Pressure : Max. 10 bar |
| Temperature : 5°C to 60°C |
| 667 25D33.1.14.2 |
| (EDV,88042596)_ DN 25mm |
| Description : GEMÜ Plastic Diaphragm Valve, Pneumatically Operated Type 667 |
| Conneciton : Union ends with inch insert (socket) |
| Body Material : PVC-U, grey |
| Diaphragm Material : EPDM |
| Control Function : Normally Open |
| Working Pressure : Max. 10 bar |
| Temperature : 5°C to 60°C |
| * SOLENOID : |
| Model : 324-1 |
| * Actuator : |
| Model : 695 20D398141 |
| PST, 5.5 - 7 bar |
| I-DE-88075164-00-2873583 |
| 514 65D1.37.5-1-2 2061 (88047034) |
| (Valve Normally closed, |
| Type: 514 65D 137 51 2 2061, |
| PST:5.5-8bar,PB=7bar,180oC,) |
| 514 50D1.37.5-1-2 2061 (88011313) |
| (Valve Normally closed, |
| Type:514 50D 137 51 2 2061 ,88011313, |
| PST:5.5-8bar,PB=7bar,180oC, DN50,PN25) |
| DN 65 mm 514 65D1.37.5-1-2 2061 (88047034) |
| + Positioner 1436000Z1SA010001050 (88257690) |
| + Mounting Kit 1436S01Z551705000 (88298041) |
| + Plastic Tubing 1440 000ZKS (88255000) |
| + Cable Plug 1219 000Z0000DW10M0M125A (88210911) |
Thông tin liên hệ: Mr Đô - 0909 560
828 - Email:quocdo@lamgiaphu.com
Không có nhận xét nào:
Đăng nhận xét